Shopping for an RVer this season, or setting up your own rig for the next trip? Every RVSetRite RIG Kit is built around the same Drive-ON idea: lay the pads, drive on, and stop on the red chock. The only question is which kit matches the rig.

Tongue Trailer Base Rig Kit — $290
13 Drive-ON pieces:
- 4 tire protectors
- 4 10-inch stabilizer pads
- 2 red rear chocks and 2 blue front chocks
- 1 TT75 7.5-inch tongue stack (red, white and blue) for the tongue jack
The tongue stack is the piece that makes this kit tongue-trailer only. It is not for motorhomes or 5th wheels.

5th Wheel Base Rig Kit — $250
12 Drive-ON pieces:
- 4 tire protectors
- 4 10-inch stabilizer pads
- 2 red rear chocks and 2 blue front chocks
MotorHome Base Rig Kit — $300
14 Drive-ON pieces:
- 6 tire protectors
- 4 10-inch stabilizer pads
- 2 red rear chocks and 2 blue front chocks
Just need chocks?
The Drive-ON 4-Chock Kit is $89: two red rear RCHK2 stop chocks and two blue front FCHK2 chocks. Drive on and stop on the rear chock.
Same set-up, every kit
- Stop 1 to 2 feet short of your spot.
- Lay a tire protector behind each tire, with a red stop chock at the end of the pad.
- Drive on slowly until the red chock stops the tire on the pad.
- Set a blue chock in front of the tire.
- Put a 10-inch pad under each stabilizer.
Every piece is 3D-printed PETG. Shipping is a flat $9, and free on orders over $150, so every RIG Kit ships free.
Pick your kit on Order Here. Questions? RVSetRite@gmail.com or 509.879.9699. Ships from Spokane, WA.

Leave a Reply